UHU plast special

We recommend this super glue for glueing our PB600 driver cabin.

Manufacturer's Specifications:
- Special glue for polystyrol parts and many other plastics.
- A particularly economical, point-precise adhesive application is possible through the fine metal cannula.
- High adhesive strength by dissolving the plastic surface (cold welding).
- The low viscosity resin adhesive forms a tough elastic, transparent adhesive film.
- Especially suited for hard to reach bonding joints.

Application:
Carefully clean the surfaces to be glued (dry, dust and grease-free). Apply adhesive on one side in a thin layer, join parts, fix briefly.
Do not wipe off surplus liquid adhesive, but cut off after curing with a cutter or a sharp knife. Then sand lightly with sanding paper. Parts can be handled after approx. 5-10 minutes, final strength is achieved after 24 hours. Apply only a very thin layer on thin-walled plastic surfaces.