Hydromaster

With the Hydromaster Servo Electronics servos can be controlled like a real hydraulic system. 
This means: the servo is turning to one direction as long as the stick on the transmitter is moved in that direction. When the stick is released the servo remains in it's last position. The more the stick is moved on the transmitter, the faster the servo turns in the model. 

The neutral position of the servo can be stored with the button switch on the Hydromaster. This position will automatically be re-assumed when the model is turned on. 
The Hydromaster is connected between receiver and servos and is immediately ready. Two independent servos may be connected (2 channels). 

Currently it is not yet possible to define the servo travel for each servo separately. But in general the full servo travel is needed, especially in our PistenBully model. 

Technical Data:
- Current: 10 mA + servo current
- Servo connectors: 2 

Dimensions:  34 x 12mm (L X W)