Light system for the Volvo by Verker with only two wires.
The Volvo FH16 from Tamiya gets the unmistakable look through our lighting kit and the striking L-shaped light inserts. The backlight boards each have 72 LEDs and are therefore absolutely true to the original. In addition, a unique gimmick was installed; the wipe indicator. This option can be turned on and off by the customer!
The light modules are delivered fully assembled and tested. They just have to be installed in the model.
For the taillights, the housing must be machined. We offer this service for our customers free of charge. Please send us your taillight housing ideal before buying and get them CNC-milled with your order back.
The machined taillight housings can be ordered here.
The lights can be controlled with the Kingpad (not included).
The Central Module & Kingpad are not needed for transmitters of the brands Brixl, ScaleArt Commander and Blauzahn.
Instead, the Kingbus-Interface is directly connected to the specific plug-in slot on the receiver. It will control the light functions via the standard Kingbus cables.
The Kingpad is not needed in this case, as the light functions can be selected by switches and buttons on the transmitter.
The extension with new light module is simple - just plug them in! More details are found in the manual.
Features:
- Parking lights
- Low beam head lights (only with parking lights)
- High beam head lights (permanently engaged only with low beam lights)
- Head light flasher
- Fog lights and rear fog light
- Brake light via driving channel
- Back-up light via driving channel or Kingpad
- wipe turn signals left / right
- Turn signal reset via steering channel
- Hazzard flashers
- Automatic curve light when turning or using turn signals
- Xenon light effect!
Technical Data:
- Operating voltage main module: 5 Volt from BEC
- Current: ca. 20 mA (idling)
Dimensions Main Module: 34 x 23,5 x 8 mm (L x B x H)
Delivery Contents:
- 1 Kingbus central module
- 2 Patch cables to connect the main module to the receiver
- 1 Kingbus 4-way connector with cable 50cm
- 1 Kingbus 4-way connector with cable 15cm
- 6 light boards
- 1 universal Module Roof
- front light inserts and fiber optics
The Volvo FH16 from Tamiya gets the unmistakable look through our lighting kit and the striking L-shaped light inserts. The backlight boards each have 72 LEDs and are therefore absolutely true to the original. In addition, a unique gimmick was installed; the wipe indicator. This option can be turned on and off by the customer!
The light modules are delivered fully assembled and tested. They just have to be installed in the model.
For the taillights, the housing must be machined. We offer this service for our customers free of charge. Please send us your taillight housing ideal before buying and get them CNC-milled with your order back.
The machined taillight housings can be ordered here.
The lights can be controlled with the Kingpad (not included).
The Central Module & Kingpad are not needed for transmitters of the brands Brixl, ScaleArt Commander and Blauzahn.
Instead, the Kingbus-Interface is directly connected to the specific plug-in slot on the receiver. It will control the light functions via the standard Kingbus cables.
The Kingpad is not needed in this case, as the light functions can be selected by switches and buttons on the transmitter.
The extension with new light module is simple - just plug them in! More details are found in the manual.
Features:
- Parking lights
- Low beam head lights (only with parking lights)
- High beam head lights (permanently engaged only with low beam lights)
- Head light flasher
- Fog lights and rear fog light
- Brake light via driving channel
- Back-up light via driving channel or Kingpad
- wipe turn signals left / right
- Turn signal reset via steering channel
- Hazzard flashers
- Automatic curve light when turning or using turn signals
- Xenon light effect!
Technical Data:
- Operating voltage main module: 5 Volt from BEC
- Current: ca. 20 mA (idling)
Dimensions Main Module: 34 x 23,5 x 8 mm (L x B x H)
Delivery Contents:
- 1 Kingbus central module
- 2 Patch cables to connect the main module to the receiver
- 1 Kingbus 4-way connector with cable 50cm
- 1 Kingbus 4-way connector with cable 15cm
- 6 light boards
- 1 universal Module Roof
- front light inserts and fiber optics