Universal Modules for installation in the cockpit of a model. Individual LEDs may be connected to the module. No additional resistors are needed as they are already integrated into the module!
The color of the LED to be connected is marked with a colored point on the module. One LED can be connected per outlet. For installation please follow the included instructions .
At the outlets marked with "HC" several LEDs (up to a total of 100mA) may be connected. In this case the correct resistor has to be determined and installed between the universal module and the LED (only at the HC outlet).
The module is delivered ready to install and tested. The connection to the Kingbus lighting system is easy - simply plug it in!
Please note also the wiring diagrams at the pictures below.
Outlets:
- Parking light
- Work light front
- High beam head light
- Turn signal left and right
- Hazard flashers
- Parking light (HC)
+ 5 Volt
Technical Data:
- Module dimensions: 27 x 15 x 8mm (LxWxH)
- Cable lenght: 300mm
Delivery Contents:
- 1 Universal Module with instructions
