Universal Modules for installation at the rear bumper of a model. Individual LEDs may be connected to the module. No additional resistors are needed as they are already integrated into the module!
The color of the LED to be connected is marked with a colored point on the module. One LED can be connected per outlet.
At the outlets marked with "HC" several LEDs (up to a total of 100mA) may be connected. In this case the correct resistor has to be determined and installed between the universal module and LED (only at the HC outlet)!
The module is delivered ready to install and tested. The connection to the Kingbus lighting system is easy - simply plug it in!
Please note also the wiring diagrams at the pictures below.
Outlets:
- Parking lights
- Rear fog light
- Brake light via driving channel
- Back-up light via driving channel or Kingpad
- Turn signals left / right
- Hazzard flashers
+ 5 Volt
Technical Data:
- Module dimensions: 27 x 15 x 8mm (LxWxH)
- Cable length: 150mm
Delivery Contents:
- 2 Universal Modules with instructions
